Must-Know Methods to Safely Take Down Your Christmas Lights

According to the United States Consumer Product Safety Commission, an average of about 160 decorating-related injuries occur each day during the holiday season. Taking down holiday decorations may look easy on paper, but there are plenty of things that could go wrong if you’re not careful.

In this article, we’ll go over five ways you can safely take down the holiday lights from your house.

1. Use a Ladder To Take Down Christmas lights

This is the safest way to take down the Christmas lights without damaging your house or nearby objects in the process. While that’s true, using ladders carelessly is still considered dangerous.

Make sure to have a secure grip on the ladder while you work. If you’re going to use a step ladder, use one that’s large enough to support your weight.

  • Safety tip: Never climb the ladder without any kind of support, even if it is just one rung. It’s highly advised to work with at least one more person to keep an eye on you.

2. Check For Ice Buildups

If there is a lot of ice, snow, or even bird droppings on your rooftop, leaving the lights in place is safest. So long as you have a water-proof cover over the lights and they are unplugged, the damage will be minimal if they remain up during the winter months.

Remove them in the spring when everything has thawed.

  • Safety tip:  If there is a lot of ice buildup on or around your home’s gutters, it may be best to get them inspected by a qualified professional before climbing up any ladders. The presence of ice alone is considered a hazard.

3. Move Lights With Care

For Christmas lights with an extension cord, do not attempt to take them down by pulling on either end of the string because it can cause damage and even break your lights. Consider using clips or wires to tie strands together properly.

  • Safety tip: Remove lights by unplugging them at both ends of the cord and taking down one section of lights before moving on to the next.

4. Turn Off the Electricity

Make sure to turn off the house’s breaker box before taking down Christmas lights. This will prevent any accidental shocks or electrical damage while you work. This is an obvious piece of advice that’s always worth reiterating.

  • Safety tip: If your lights also plug into outlets, make sure to turn off the circuit breakers for each outlet before you take them down.

5. Remove Outdated or Damaged Lights First

If you decide to take down all of your Christmas lights, start with the oldest and most damaged sets first so that they don’t accidentally drop onto another set.

Consider testing the lights before storing them away to get rid of bulbs or strands that no longer work. Faulty holidays lights can be a fire hazard the next time you use them around your home.

  •  Safety tip: When dismantling old lights, be sure to unplug them at both ends before untangling them so as not to cause any electrical shorts or damage.

You Don’t Have To Do It Alone

While it’s tempting to take down all the holiday lights by yourself, it’s still highly recommended to seek assistance. Consider calling a friend or two to help you take down the decorations. By working as a team and following these safety tips, you should be able to take down those lights with no issues.

If all this seems too much work or if it’s not safe enough for you, consider hiring qualified professionals to take down your Christmas lights and other decorations safely.

Texas Light Crew is a professional Christmas light installation company that also offers holiday lighting and decoration take-down services. Contact us today if you’re looking for a crew to help you remove your holiday lights.

Our team would be happy to discuss our services and provide you with a free quote.

How To Properly Take Down And Store Christmas Lights

Now that the holidays are over, it’s time to do one of your most dreaded household chores: taking down and putting away Christmas lights. String lights can be frustrating to arrange and store, so it’s tempting to just throw them in boxes any which way and forget about them until the next holiday season.

However, not storing your holiday lights properly can tangle them, or worse, damage the bulbs. As such, you want to pack away your Christmas lights carefully so you can use them again next year.

Here, Texas Light Crew, a trusted Christmas light installation service, shares tips on how to properly and safely take down and store holiday lights to make decorating easier next season.

1. Shut Off The Electricity

The first thing you should do is turn the fuse off for your Christmas lights, especially if it’s snowing or damp outside. According to the Electrical Safety Foundation International, this eliminates the risk of electrical accidents, which typically increase during the winter season.

2. Use The Right Equipment

Most people use a ladder to climb onto their roofs and take down their holiday décor. But did you know you’re not supposed to use a metal ladder when working on your roof? Electric current can travel from live wires to the ladder, which can cause electrocution.

Use a wooden ladder instead to avoid electrocution accidents. You also want to prepare gloves, pliers, and garden scissors in case you need them.

It’s also a good idea to have someone help you take down holiday lights. They can hold down the ladder to keep it from wobbling and hand you tools.

3. Wrap The Christmas Lights Around A Holder

The best way to store Christmas lights is to wrap them around something like a cord reel or a clothes hanger. The holder doesn’t have to be fancy – you can even use cardboard cut into H-shaped pieces to wind your string lights around.

This technique keeps your holiday lights in place and prevents them from getting tangled. This way, you won’t have to go through the trouble of detangling them the next time you’re going to use them.

4. Store The Christmas Lights In Plastic Containers

After wrapping the lights around the holder, store them in plastic containers. Doing so protects your lights against moisture that can damage the wiring and bulbs. It also keeps rats and other critters from chewing on the cords of your lights.

Proper Way To Take Down And Store Holiday Lights

Taking down your Christmas lights seems like such an insignificant task, but that doesn’t mean you can do it haphazardly. Properly storing your holiday lights not only make next year’s decorating work easier, but it also helps prolong the lifespan of your lights, so you can use them again and again.

If you don’t want to go through the trouble of putting away your lights, have a professional do it for you instead. Texas Light Crew offers Christmas lighting removal services, ideal for homeowners who don’t have the time to do it themselves. We will safely and carefully take your lights down and store them for you all year, making sure they’re still in great condition for next season.

Fill out our online form to get a free quote or to send your inquiries.

Outdoor Christmas Light Safety: Dos & Don’ts to Remember

Decorating your home with Christmas lights is a quintessentially American holiday tradition. This practice, however, is the reason residential and electrical fires are highest during the holidays. The U.S. Fire Administration says that nearly 156,000 fires occur in the country each year during the winter holiday season.

With that, it’s crucial to observe safety practices when installing holiday lights for your and your family’s safety. Texas Light Crew, a professional holiday light designer, shares the dos and don’ts of outdoor Christmas light safety.

Christmas Lights Dos

Examine Lights Before Installing

The first thing you should do after taking your lights out of storage is to examine them. Check for frayed or bare wires, cracked or broken sockets, and loose connections. It’s also a good idea to plug them in first before hanging them up to look for bad bulbs.

If there are any burned-out bulbs, you can easily replace those with bulbs of the same wattage. But if the wires and sockets are damaged, you need to replace the whole set to prevent fires caused by electrical shorts.

Use Verified Lighting & Outlets

Choose holiday lights that are rated for outdoor use. Outdoor lights are waterproof, which helps prevent fire hazards and electrical shocks. These holiday lights have a red holographic UL mark on the tag, indicating that the product has been tested and approved by Underwriters Laboratories.

You also want to plug your Christmas lights into a ground-fault circuit interrupter (GFCI) outlet. A GFCI outlet is designed to cut the power if it comes into contact with water, preventing electrical fires.

Fasten Your Outdoor Lights

Always fasten your outdoor lights to stable surfaces, such as the walls and roof of your house or nearby tree trunks. Doing so keeps your lights from getting blown by the wind and tangled in tree canopies or electrical service lines connecting to your house.

Christmas Lights Don’ts

Don’t Use Staples, Tacks, or Nails for Fastening

Metal fasteners can generate heat and circuits that could set your home on fire. They can also cause electrocution hazards if they come into contact with live strings of holiday lights and transfer the current to the metal components of your house, such as your gutters and downspout.

Use plastic roof clips or insulated holders designed for outdoor lights instead of tacks, staples, and other metal fasteners.

Don’t Plug Too Many Lights in the Same Outlet 

This should go without saying, but it is a large safety hazard that therefore deserves noting. Never over plug too many lights into the same outlet! This is where a professional Christmas light installer can certainly come in handy – with the planning and layout of plugs to not overwhelm your sockets.

Don’t Leave Your Christmas Lights On During The Day

The Consumer Product Safety Commission urges everyone to unplug their lights before going to bed or leaving the house. If you frequently forget to unplug them, you can purchase a timer for your holiday lights so that they automatically turn off at the same time each day.

Practicing Christmas Light Installation Safety

Working with holiday lights can be difficult and risky, especially if you’re hanging them up on your roof. To ensure safe and proper installation, hire professional Christmas light installers instead of doing it yourself.

Texas Light Crew is a trusted professional holiday light installer. Our team is highly experienced and trained, so we know how to properly install the lights to prevent fires and electrical problems.

Fill out our online form to get a free quote or to send your inquiries.

3 Reasons to Have Your Christmas Lights Professionally Installed

Decorating your home for Christmas isn’t always a merry occasion. According to the U.S. Consumer Product Safety Commission, an average of 200 decorating-related injuries occur every day during the holiday season! Half of these incidents involve falls.

One of the most dangerous holiday decorating activities is putting up lights on your home’s exterior, specifically the roof. You’re working at a height, possibly with the roof damp and slippery due to snow. Additionally, dealing with strings of Christmas lights can be even more challenging when you’re on top of a ladder. These conditions increase your risk of falling and injuring yourself.

To achieve the holiday décor theme you want without exposing yourself to danger, consider professional Christmas lights installation. Having a pro do the work for you has several benefits. Here are some of them:

1. Prevent Accidents

The biggest advantage of having your lights professionally installed is, of course, your safety. Professional holiday lighting installers are experienced. They know how to safely and properly work at great heights, which reduces their risk of being injured.

They’re also insured, meaning you won’t have to pay out-of-pocket in case an accident does occur. You won’t get this coverage if you or a friend does the installation, so you likely will have to pay for the medical expenses yourself.

Hiring a professional also prevents other holiday decorating-related accidents, such as fires caused by Christmas lights. Professionals know which kind of lights to use for which places to prevent accidental fires. Fire safety is an important consideration when putting up holiday lights since these cause 770 house fires every year, according to the National Fire Protection Association.

2. Request a Custom Design

If you want a specific lighting design but can’t execute it yourself, then professional holiday lighting services are the way to go. Whether you’re looking for a monochromatic, soft light theme or a more vibrant, colorful design that screams Christmas, a professional holiday lighting installer can achieve the look you want for your home.

You can also request to combine different types of lights for your house. For instance, the ones hanging on your porch can be twinkle lights while the ones outlining your roof are static.

3. Use Higher Quality Lights

Holiday lighting designers do other tasks besides installation. They take care of cable management so that the wires and cords won’t be exposed to the elements or cause people to trip. They also calculate the correct wattage needed to light a house that’s as big as yours, preventing blown fuses and making sure that your home is sufficiently illuminated.

Additionally, professional light designers use only the highest quality lights, usually, commercial-grade LED lights. LEDs use 75% less energy than incandescent lighting, meaning they’re cheaper to run so you can leave your holiday lights on all season.

Professional Christmas Light Installation Services

Ultimately, hiring holiday light installers makes decorating safer and more convenient for you. You won’t have to climb onto your roof, detangle strands of lights, and spend hours affixing wires to the exterior of your house. With a professional lighting designer, you can achieve the holiday décor theme you want fuss-free.

If you’re interested in professional Christmas light installation services this year, Texas Light Crew is here to help. We offer a range of lighting services, from full roof outlines to driveway lights, plus, we’re local first responders and firefighters, so we know safety!

Fill out our online form to get a quote.